Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.
Inspection Status: Re-inspection required
Inspection History: COT - SIGN - Sign Final
| Date |
Description |
Inspector |
Results |
Comments |
| 08/07/2019 |
COT - SIGN - Sign Final |
CTREVI |
Prior to Intermediates |
Entered by CTREVIL1 - 1. The north horizontal offset beam remained rigidly affixed to the north vertical supporting I-beam while the four (4) 1 ¼-inch diameter A325 bolts attaching the two parts were replaced one at a time.
2. The four (4) 1 ¼-inch A325 bolts attaching the north vertical tapered upright to the north horizontal offset beam were removed, a replacement vertical tapered upright was placed on the same location on the horizontal offset beam, and four (4) new 1 ¼-inch diameter A325 bolts were installed in place of those removed.
3. The south vertical tapered upright remained rigidly affixed to the south horizontal offset beam while the four (4) 1 ¼-inch diameter A325 bolts attaching the two parts were replaced one at a time.
4. The south horizontal offset beam remained rigidly affixed to the south vertical supporting I-beam while the four (4) 1 ¼-inch diameter A325 bolts attaching the two parts were replaced one at a time. |