Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Inspection History Details

Permit: T18OT01177

Parcel: 126020010


Addresses:

4668 E SPEEDWAY BL


Inspection Status: Not Ready

Inspection History: COT - ENGR - Signage Final

Permit Number - T18OT01177

Inspection Description - COT - ENGR - Signage Final

Inspection Status - Not Ready

Date Description Inspector Results Comments
10/27/2022 COT - ENGR - Signage Final Not Ready
02/01/2019 COT - ENGR - Signage Final ACONNOR Approved Entered by ACONNOR1 - TOTAL $415.74
12/20/2018 COT - ENGR - Signage Final Hthrall Continued Entered by HTHRALL1 - Submitted for SDRC review, needs property owner signature on MSP application, to contact contractor to obtain during process.
12/18/2018 COT - ENGR - Signage Final Hthrall Continued Entered by HTHRALL1 - SDRC referral for SSDO revised to reflect updated plan set.
12/14/2018 COT - ENGR - Signage Final Hthrall Continued Entered by HTHRALL1 - Revised plans and SSDO app received.
12/11/2018 COT - ENGR - Signage Final Hthrall Continued Entered by HTHRALL1 - Four variances needed through the Sign Design Review Option process called a Signular Sign Design Option (SSDO), as was noted in referral 12/11/18 and emailed to contractor. The case reserved is MSP-18-027 online T18SA00514 (paid for 11/16, but application need to be submitted with the revised plans): COMMENTS: The following are relative to an application for a Singular Sign Design Option (SSDO) for permanent signs, per 7A.7.1 of the Unified Development Code (UDC). The Singular Sign Design Option request is to vary the following criteria for signs within the Commercial Sign District, 7A.10.2.C.: 1) UDC 7A.10.2.C. - maintain nonconforming reduced setbacks off Swan Road at 14' (rather than 20') from face of curb for the existing structure, with digital conversion. 2) UDC 7A.10.2.C. - maintain existing nonconforming height of the monument sign off Swan Road top of curb at 10.04 feet (to exceed 10 feet), with digital conversion. 3) UDC 7A.10.2.C. - maintain existing nonconforming height of the monument sign off Speedway Boulevard top of curb at 10.67 feet (to exceed 10 feet), with digital conversion. 4) UDC 7A.9.1.C. - except for reasonable repairs and alterations, no nonconforming sign shall be moved, altered removed and reinstalled or replaced, unless brought into compliance with sign standards. Updating of electrical components for a non-conforming sign is an approved alteration. The alteration cannot change the sign copy from static copy to digital copy. This nonconforming sign contains both digital and static copy, with a request to renovate the sign to full digital copy, not just partial digital function.
12/04/2018 COT - ENGR - Signage Final HTHRALL Continued Entered by HTHRALL1 - Contractor emailed revised plans. Reviewed / Emailed with minor adjustments to clarify premise boundary and add photocell. Awaiting next set of diagrams.
12/03/2018 COT - ENGR - Signage Final HTHRALL Continued Entered by HTHRALL1 - EMAILED PLAN REVISION REQUEST TO CONTRACTOR: On the plans for submittal to SDRC, can you... A) show bisection on street corner to show freestanding sign is on Swan frontage? B) take off color temp note C) change from once an hour to once a minute for digital (this one was already at that rate and was nonconforming for that prior to February) D) note new pole cover, materials made out of an how attached E) change square footage in top data box to match the 50 sq.ft. dimensions F) provide zoom out sheet showing overall strip center and call out existing sign at the west end of the site
11/29/2018 COT - ENGR - Signage Final Hthrall Continued Entered by HTHRALL1 - Sign Review for SDRC process (Singular Sign Design Option SSDO) For renovation of existing nonconforming monument sign - partially digital, partially static - with full digital display: At: Ambassador Jewelers / AZ Coin - 4668 E Speedway Zoned: C-2 commercial Permit: T18OT01177 Reviewer: H. Thrall Follow up transmittal for SDRC 11/29/18 The Singular Sign Design Option request is to vary the following criteria for signs within the Commercial Sign District, 7A.10.2.C.: 1) Lot is not a premise per definition, but is part of an overall premise within a shopping center. The lot, under current code, may not have it's own freestanding sign, thus the existing sign is nonconforming. To allow the sign to remain for use of one tenant requires a variance. (definition of premise) 2) UDC 7A.10.2.C. -exceed number of allowed freestanding signs per premise off Speedway frontage, by one sign (less than 450' of street frontage, approximately 314' for center along Speedway.) Unless applicant can show bisection line on plan this is signage for center off Swan frontage. 3) UDC 7A.10.2.C. - maintain reduced setbacks off Swan Road at 14' (rather than 20'). 4) UDC 7A.10.2.C. - maintain existing nonconforming height of monument sign off Swan Road top of curb at 10.04' 5) UDC 7A.10.2.C. - maintain existing nonconforming height of monument sign off Speedway Boulevard top of curb at 10.67' 6) UDC 7A.9.1.C. - except for reasonable repairs and alterations, no noncoforming sign shall be moved, altered removed and reinstalled or replaced, unless it is brought into compliance with the sign standards. The updating of electrical components for a non-conforming sign may be considered an approved alteration. The updating of electrical components for a non-conforming sign may be considered an approved alteration. The alteration cannot change the sign copy from static copy to digital copy. This nonconforming sign contains static copy with a request to renovate the sign to full digital copy, not just partial digital function.
11/09/2018 COT - ENGR - Signage Final ACONNOR Correction Required Entered by ACONNOR1 - 7A.10.2 PERMANENT SIGNS THIS SITE IS ZONED C-2 AND IS SUBJECT TO THE GENERAL BUSINESS DISTRICT OF THE SIGN CODE. PROPOSAL APPEARS TO BE REMOVING EXISTING NON-CONFORMING ELECTRONIC MESSAGE CENTER SIGN AND REPLACE WITH A NEW EMC MONUMENT SIGN IN THE SAME LOCATION. Freestanding signs. A. Monument type sign, general The Minimum setback is Twenty (20) feet from curb to leading edge of sign. Provide the following: FREESTANDING SIGNS ARE REQUIRED TO INCLUDE WITH SUBMITTALS: A scaled site plan indicating street frontage, property lines, sight visibility triangles, proposed and existing rights-of-way, location of sign on property and relationship of proposed sign to ingress and egress points. Maximum height: Ten (10) feet from grade. Provide height measurement. 7 A.7.3. SINGULAR SIGN DESIGN OPTION MAY BE AN OPTION FOR PROPOSED SIGNAGE.