Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Not Ready
Inspection History: COT - ENGR - Signage Final
Permit Number - T18OT00567
Inspection Description - COT - ENGR - Signage Final
Inspection Status - Not Ready
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 10/27/2022 | COT - ENGR - Signage Final | Not Ready | ||
| 06/20/2018 | COT - ENGR - Signage Final | BWIESE1 | Approved | Entered by BWIESE1 - This permit is ready to be paid for and picked up. Your stamped & issued sign permit must be on site during install. You can pick up your permit from 8am -11:30am at the Sign Desk 201 N Stone Ave, 1st floor, North side of building. In person you can pay, cash, check, or charge |
| 05/29/2018 | COT - ENGR - Signage Final | hthrall | Continued | Entered by HTHRALL1 - RE: new wall /window signs / change copy two freestanding panels AT: 9615 E Old Spanish Trail, Target Zoning: C-2 (no rezoning) Permit: T18OT00567 Facade renovation review: T18CM2756 (incomplete - may be interior only) Sign Code determination: T17SA00450 / Scenic Corridor Zone overlay Reviewer: H. Thrall Sign area and change copy proposal within code. The following corrections to the plans are needed: 1) Provide mounting details for: A) Sign "A" individual letter and logo signage at 199.60 square feet sign area. (ie. size number of bolts and number of penetrations per letter to wall surface 2) Electrical: NEC 600 A) Acknowledged a "lockable disconnect" noted on plans. Clarify - separate from required shut off switch locations to signs? (all signs) 3) Outdoor Lighting Code: Ch. 4 A) provide timer, indicate where located - notation or diagram is fine - all signs 4) Provide elevation within building façade plan verifying exterior changes to building have been approved prior to release of sign permit. In for revision. |