Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Correction Required
Inspection History: SIGN SITE REVIEW
Permit Number - T17OT01248
Inspection Description - SIGN SITE REVIEW
Inspection Status - Correction Required
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 12/01/2017 | SIGN SITE REVIEW | Correction Required | Sec. 3-18. Application for permit. A. To obtain a permit, the applicant shall first file an application therefore in writing on a form furnished by the development services department for that purpose. Every such application shall contain the following information: 1. Street address where the sign is to be installed; Provide actual street address of site. Identification and description of the work to be covered by the permit for which application is made; Drawing of sign indicating the sign message or copy; Provide drawings with copy. Site plan indicating street frontage, property lines, sight visibility triangles, proposed and existing rights-of-way, location of sign on property and relationship of proposed sign to ingress and egress points; Provide full site plan and remove any signs that are not being installed with this permit Note: It is not appropriate to use drawings prepared by others. Construction details of the sign; method of attachment (details), including number, size and type of anchors being used; weight of sign or components; and character of structural members to which attachment is to be made; Provide installation details on drawings. Certificate of insurance must be on file with the development services department. Provide Certificate of insurance and ROC # of contractor. Engineered plans and specifications. The following signs shall require engineered plans and calculations sealed by an engineer and/or architect registered in the State of Arizona: Detached or freeway signs when the area of the sign or the aggregate area of all signs on the sign structure, including the pylon and/or pole cover, exceeds sixty (60) square feet; Provide sealed specification registered Engineer. Pole cover: The sign structure configuration must be equipped with pole covers or architectural embellishments that hide or conceal all structural components or braces (such as pipes, angles, iron, cables, internal back framing, bracing, etc.). Minimum requirement is eighteen (18) inches by six (6) inches. The pole cover or architectural embellishment shall require a plan check for construction specifications in accordance with applicable technical codes. Sec. 3-33. Grade. A. General: The grade of a sign is the elevation of the outside edge of the street or roadway travel lane nearest to the sign measured perpendicular to the travel lane: Provide height of sign from grade of sign from edge of pavement or curb. Additional reviews required: 5.12.7. RIO NUEVO AREA (RNA) ZONING DESIGN STANDARD Review by the Design Review Board (DRB) The Design Review Board (DRB) reviews all applications for compliance with the RNA standards in conjunction with the underlying zoning, and makes findings and recommendations to the PDSD Director. Applications are scheduled with the DRB at the first available meeting. |