Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Continued
Inspection History: SIGN INSPECTION
Permit Number - T17OT01201
Inspection Description - SIGN INSPECTION
Inspection Status - Continued
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/19/2018 | SIGN INSPECTION | Continued | Heather emailed Scott Dray at Bourn and copied Bleier that new sign permit submittal under recently adopted sign standards will address height issue from former sign code. | |
| 02/21/2018 | SIGN INSPECTION | Continued | Met with Rob East, developer. New sign standards will address height issue, as Inspection Supervisor had conducted survey under new code, found sign grade north of sign higher than curb - average height analysis under new standard would render sign within height allowance of a monument. New sign permit for the freestanding sign would be submitted with new measurement data. Inspector to meet with Heather to contact sign contractor, Bleier Industries, for new submittal to review. | |
| 02/06/2018 | SIGN INSPECTION | Not ready for Inspection | LOOKED AT THE SIGN TO SEE IF IT IS IN COMPLIANCE PER THE APPROVED PLANS. THIS SITE APPEARS TO BE APPROXIMATELY 11 INCHES TOO TALL FOR THIS LOCATION USING THE EXISTING CURB HEIGHT OF IRVINGTON. THE CONTRACTOR HAS BEEN ADVISED OF THIS INFORMATIONA AND WILL BE TALKING TO HIS PEOPLE IN THE OFFICE AND WILL WORK WITH HEATHER IN REGARDS TO WHAT THEY WILL NEED TO DO TO MAKE THIS SIGN ACCEPTABLE. | |
| 12/27/2017 | SIGN INSPECTION | Partial Approval | ALL REBAR COMPLETE |