Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T17OT00636
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
Date | Description | Inspector | Results | Comments |
---|---|---|---|---|
07/24/2017 | SIGN SITE REVIEW | Approved | ||
06/21/2017 | SIGN SITE REVIEW | Partial Approval | NOTE: PRIOR SUBMITTAL WAS DENIED 11/17/16 UNDER T16OT01357 4/28/17 - VARIANCE REQUESTED - NO NEED, ADD POLE COVERS. SIGN HEIGHT FROM PARKING LOT, AS SIGN IS MORE THAN 40 FEET AWAY FROM STREET CURB. CONTRACTOR INFORMED VIA EMAIL. CURRENT SUBMITTAL JUNE 2017 WAS GIVEN A NEW PERMIT NUMBER, T17OT00636 The submittal for Merles needs the following additional information or revisions as noted below ... 1. You have listed this as a "change of copy" . ("change of copy" is only used when the only modification is a replacement of the lexan panel.) This will be treated as a New sign on an existing base, as you are adding as EMC. 2. The Site plan you have provided is a very simplistic "line drawing". This cannot be approved. Heather says you showed her a much more detail Site Plan. Please provide the Site Plan she mentioned. Contact her if you have questions concerning this Site Plan 3. Provide an accurate construction detail, showing the two separate units ( upper & lower) and how it all fits in to the existing cabinet or are you building a new cabinet? a. "upper sign" area 1. (light source? LED or Fluorescent, etc) 2. Separate disconnect switch 3. Separate CIRCUIT 4. Divider bar? b. "lower sign" EMC, 1. Separate disconnect switch 2. Separate CIRCUIT 3. How is it cradled in the existing cabinet? Dan Santa Cruz will need to sign off on this |