Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Not Ready
Inspection History: COT - ENGR - Signage Final
Permit Number - T17OT00300
Inspection Description - COT - ENGR - Signage Final
Inspection Status - Not Ready
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 10/27/2022 | COT - ENGR - Signage Final | Not Ready | ||
| 02/01/2019 | COT - ENGR - Signage Final | ACONNOR | Not ready for Inspection | Entered by ACONNOR1 - |
| 06/01/2018 | COT - ENGR - Signage Final | ACONNOR | Not ready for Inspection | Entered by ACONNOR1 - |
| 06/16/2017 | COT - ENGR - Signage Final | ACONNOR | Approved | Entered by ACONNOR1 - |
| 03/27/2017 | COT - ENGR - Signage Final | ACONNOR | Correction Required | Entered by ACONNOR1 - The site is currently zoned R-1 only 20 sq. ft. would be allowed the proposed signage is 117.5 sq. ft. However, the site is currently applied for a re-zoning once the re-zoning has been effectuated additional sign allowance may apply. Sec. 3-73. Single family residential district. A. Location: The single family residential district includes all property in the rural residential zones, the RX-1, RX-2, R-1 and MH-1 zones, Tucson Land Use Code (LUC) Article II, Division 2 and LUC Sec. 2.3.2, 2.3.3, 2.3.4 and 2.3.8. The single family residential district also includes property in less restrictive zones where the approved site plan, development plan or plat is for a single family dwelling as the principal use. The establishment of a more intensive use in conformance with an approved site plan, development plan or plat shall re-designate the property to the applicable sign district. B. Maximum total sign area: 1. Nonresidential uses: Twenty (20) square feet of total sign area per street frontage. On buildings having more than one street frontage, the maximum allowable number and square footage of on-site signs are permitted for each street frontage. The maximum allowance, however, is not transferable either in whole or in part from one street frontage to another. Note: Real estate project identity entrance sign, general requirements Permitted locations: At major street entrances to the subdivision or a separately named portion of the recorded subdivision. 2. Maximum allowable sign area: Twenty (20) square feet. 3. Maximum number: Two (2) signs per street entrance. 4. Maximum faces: One (1) per sign. Project identity sign are allowed in the current zoning classification, However, no recorded subdivision could be found for this location. Additional comments may apply upon subsequent reviews |