Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Denied
Inspection History: FRAMING
Permit Number - T17CM09406
Inspection Description - FRAMING
Inspection Status - Denied
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/21/2018 | FRAMING | Denied | NEED FHA PLATES ON 1ST FLOOR CODENSATION LINE 2ND FLOOR MECH. OPENING OPENING NEEDS FOAM |
|
| 03/21/2018 | FRAMING | Approved | ||
| 03/12/2018 | FRAMING | Cancelled | ||
| 03/08/2018 | FRAMING | Denied | GARAGE VENTS NEED SEPARATION/BLOCK IN BETWEEN BOTTOM AND TOP. FHA PLATE IN GARAGE NOT INSTALLED PROPERLY, NOT FULLY NAILED 2ND FLOOR VENT PENETRATION NEEDS BLOCKING AND FOAM PLACE BANG PLATES WHERE APPLICABLE 2ND FLOOR FHA PLATE MISSING OVER 1/2 THE NAILS MECHANICAL/AIR VENTS NEED TO BE FRAMED OR BLOCKED UP OM 3 SIDES FHA PLATE NEEDED ON TOP PLATE WHERE METALIC GAS LINE PENETRATES TOP PLATE. WATER HEATER EXHAUST VENT PENETRATION FROM GARAGE TO LAUNDRY ROOM NEEDS TO HAVE BLOCK AND FOAM. ECT ECT.... |