Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T16OT00324
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 07/13/2017 | SIGN SITE REVIEW | Approved | ||
| 05/12/2017 | SIGN SITE REVIEW | Not ready for Inspection | Installer has asked for extension as site is only now ready for install. | |
| 06/27/2016 | SIGN SITE REVIEW | Approved | TOTAL $655.34 | |
| 04/07/2016 | SIGN SITE REVIEW | Correction Required | The sign indicated on the application would be allowed according to the regulations of the Sign Code However, this site does not have approved development package and building plans. Sign submittals can not be approved until site development and construction reviews have been completed and permits have been issued. |
|
| 04/05/2016 | SIGN SITE REVIEW | Correction Required | Illuminated signs, are required to have complete electrical details, including type of illumination, number of fixtures, operating voltage, number of circuits, total line load and location of electrical disconnect(s). All signs are required to 7 day programmable timer. | |
| 03/14/2016 | SIGN SITE REVIEW | Correction Required | Sec. 3-62. Freeway sign. The following applies to freeway signs: Permitted locations: Must be within two hundred fifty (250) feet of a freeway right-of-way. FREEWAY SIGNS ARE REQUIRED TO INCLUDE WITH SUBMITTALS: A scaled site plan indicating the distance of the proposed sign from the dedicated ADOT Right of Way. Maximum height: Forty-eight (48) feet from freeway grade to top of sign. Provide detail of how height of sign is determined from freeway grade. Note: For freeway signs, the freeway grade is the elevation of the outside edge of the freeway travel lane nearest to the freeway sign. Minimum clearance: Fourteen (14) feet from grade to bottom of sign. Indicate clearance from grade on elevation drawings. Sec. 3-23. Special inspector required. A. The following sign types shall be subject to continuous inspection by special inspectors as provided in Chapter 1 of the International Building Code. All detached sign structures exceeding one hundred (100) square feet in area or twenty-five (25) feet in overall height. A record of the special inspections shall be submitted to the development services department by the applicant and retained by the development services department with the sign permit application. Inspection Certificate can be found @ http://cms3.tucsonaz.gov/files/dsd/Special_Inspection.pdf Illuminated signs, are required to have complete electrical details, including type of illumination, number of fixtures, operating voltage, number of circuits, total line load and location of electrical disconnect(s). All signs are required to 7 day programmable timer. Engineered plans specifications and electrical are reviewed separately by the structural the department of the City of Tucson, additional comments may apply upon subsequent reviews. |