Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: MECHANICAL - INTERMEDIATE
Permit Number - T16CM04448
Inspection Description - MECHANICAL - INTERMEDIATE
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 10/04/2016 | MECHANICAL - INTERMEDIATE | Approved | IVRS - Inspection :* | |
| 08/17/2016 | MECHANICAL - INTERMEDIATE | Partial Approval | Please comply with min code requirements; Fasten Dryer Duct. | |
| 08/16/2016 | MECHANICAL - INTERMEDIATE | Denied | no change at B-vent, or line set. Failure to comply with noted corrections may result in re-inspection fees. Provide a minimum of 1 inch clearance at B-vent. Safety plates shall extend down 2 inches below top plate. support line set tubing with approved methods, and protect fron damage at safety plate. Dryer duct shall be secured, supported and mechanically fastened per IRC M1502.4.2 |
|
| 08/11/2016 | MECHANICAL - INTERMEDIATE | Denied | IVRS - Inspection : See detailed listing on site.| 999 * |