Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T15OT01177
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 09/28/2015 | SIGN SITE REVIEW | Approved | PERMIT READY TO PAY FOR & PICK UP | |
| 09/04/2015 | SIGN SITE REVIEW | Denied | IORA T15OT01177 REVSION: NA/ORGINAL RECEIVED: 8/29/15 REVIEWED: 9/4/15 by Sign Permit Team APPLICATION & DRAWING DENIED. A revision is required as per Sign Code 3-16. Revisions required include... Page 1 of the drawings submitted must be marked with an (A). All of the information on the application that pertains to SIGN (A) must also be on Page 1 (A) of the drawing. The information required on Page 1 (A) of the drawing includes 1.A scaled image of SIGN (A) showing its a. width & length in "decimal feet" (ex. 3.58') to match application. b. the square footage in "decimal feet" (ex. 24.17 SQ FT) to match application. c. the scale used (ex. SCALE 3/8"=1') 2. A photo of the building elevation showing the placement of SIGN (A) to scale, showing the a."Over all height" of the top of SIGN (A) in "decimal feet" (ex. OAH 19') to match application. b.Frontage of the building/suite in "decimal feet" (ex. 67') to match application. c.Direction that the elevation faces (ex. NORTH ELEVATION) d.the scale used (ex. SCALE 1/4"=1') 3.A construction/electrical diagram of SIGN (A) showing a.Construction details b.Attachment details (number, size and type of anchors) c.Materials used in construction of the wall. (ex. Masonry wall) d.Type of illumination (ex. LED) e.Indicate the AMPS__ VOLTS__ CIRCUITS__ f.Include the following note " 24 Hour programmable timer installed to comply with the COT outdoor lighting code" 4.Each page must show a. Title bar of installer applying for the permit (ex. Global Sign Works) b.Must note page number and number of pages submitted. (ex. Page 1 of 2) Page 2 of the drawings submitted must be marked LOCATION MAP 1. The last page of the submitted packet must be the LOCATION MAP showing a. A map of the existing site. (a Google aerial photo is good) b. Clearly label all adjacent streets c. The location of sign A on the correct building elevation with arrow. d. Show frontage 81'to match application on map e. Must note page number and number of pages submitted. (ex. Page 2 of 2) |