Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T15OT01004
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 08/07/2015 | SIGN SITE REVIEW | Approved | ||
| 07/31/2015 | SIGN SITE REVIEW | Denied | FAMILY DOLLAR T15OT01004 REVSION: NA/ORGINAL RECEIVED: 7/13/15 REVIEWED: 7/31/15 by Sign Permit Team APPLICATION & DRAWING DENIED. A revision is required as per Sign Code 3-16. Revisions required include: Page 1 of the drawings submitted must be marked with an (A). The information required on Page 1 (A) of the drawing includes 1.A scaled image of SIGN (A) showing its a. width & length in "decimal feet" (ex. 3.58') to match application b. the square footage in "decimal feet" (ex. 24.17 SQ FT) to match application c. the pole cover and its width & length in "decimal feet" d. Illustration of the 5" internal steel support (inside the sign drawing) e.Illustration of the caisson and its width & length in "decimal feet" f. Side view of entre sign, pole cover , support pole and caisson, g. Depth of entire sign cabinet (w vacuformed faces) not just the cabinet. h. All hand written information requires the initials of the applicant. i. General specification call out a "Area squared" that conflicts with other measurements. 2.Each page must show a. Name of contractor applying for the permit (ex. Fluoresco) b. Must note page number and number of pages submitted. (ex. Page 1 of 2) Site Plan: Must include all of the following 1.Must show the entire site outlined in orange. 2.Must specify what type of PREMISE it is. 3.Must indicate the lowest point in a 50' radius of sign. Engineering: 1.The engineering calculations attached are mostly unreadable, include inaccurate measurements and are expired. I would remove this engineering packet from the submittal. 2.Not required when the square footage of cabinet and polecover combined are less than 60 sq ft. Subject to receipt of corrected plans, additional comments may be forth coming. |