Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T15OT00963
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 08/06/2015 | SIGN SITE REVIEW | Approved | ||
| 07/31/2015 | SIGN SITE REVIEW | Denied | FAMILY DOLLAR T15OT00963 REVSION: NA/ORGINAL RECEIVED: 7/13/15 REVIEWED: 7/30/15 by Sign Permit Team APPLICATION & DRAWING DENIED. A revision is required as per Sign Code 3-16. Revisions required include: Page 1 of the drawings submitted must be marked with an (A). All of the information on the application that pertains to SIGN (A) must also be on Page 1 (A) of the drawing. The information required on Page 1 (A) of the drawing must include 1. A written description of SIGN (A) 2. A scaled image of SIGN (A) showing its a. width & length in "decimal feet" (ex. 3.58') b. the square footage in "decimal feet" (ex. 24.17 SQ FT) c. the scale used (ex. SCALE 3/8"=1') 3. A drawing of the building elevation showing the placement of SIGN (A) to scale, showing the a. "Over all height" of the top of SIGN (A) in "decimal feet" (ex. OAH 16.75') b. Frontage of the building/suite in "decimal feet" (ex. 25') c. Direction that the elevation faces (ex. NORTH ELEVATION) d. the scale used (ex. SCALE 1/4"=1') 4.A construction/electrical diagram of SIGN (A) showing a.Construction details b. Attachment details (number, size and type of anchors) c. Materials used in construction of the wall. (ex. Masonry wall) d. Type of illumination (ex. LED) e. Show & indicate the DISCONNECT SWITCH f. Indicate the AMPS__ VOLTS__ CIRCUITS__ g. Include the following note " 24 Hour programmable times installed to comply with the COT outdoor lighting code" 5.Each page must show a. Name of contractor applying for the permit (ex. Fluoresco) b.Must note page number and number of pages submitted. (ex. Page 1 of 10) Page 2 of the drawings submitted must be marked with an (B). All of the information on the application that pertains to SIGN (B) must also be on Page 2 (B) of the drawing. The information required on Page 2 (B) of the drawing includes 1.A written description of SIGN (B) 2.A scaled image of SIGN (B) showing its a.width & length in "decimal feet" (ex. 3.58') b.the square footage in "decimal feet" (ex. 24.17 SQ FT) c.the scale used (ex. SCALE 3/8"=1') 3.A drawing of the building elevation showing the placement of SIGN (B) to scale, showing the a."Over all height" of the top of SIGN (B) in "decimal feet" (ex. OAH 16.75') b.Frontage of the building/suite in "decimal feet" (ex. 25') c.Direction that the elevation faces (ex. NORTH ELEVATION) d.the scale used (ex. SCALE 1/4"=1') 4.A construction/electrical diagram of SIGN (B) showing a.Construction details b.Attachment details (number, size and type of anchors) c.Materials used in construction of the wall. (ex. Masonry wall) d.Type of illumination (ex. LED) e.Show & indicate the DISCONNECT SWITCH f. Indicate the AMPS__ VOLTS__ CIRCUITS__ g.Include the following note " 24 Hour programmable times installed to comply with the COT outdoor lighting code" 5.Each page must show a. Name of contractor applying for the permit (ex. Fluoresco) b.Must note page number and number of pages submitted. (ex. Page 2 of 10) Page 3 of the drawings submitted must be marked with an (C). All of the information on the application that pertains to SIGN (C) must also be on Page 3(C) of the drawing. The information required on Page 3(C) of the drawing includes 1.A written description of SIGN (C) 2.A scaled image of SIGN (C) showing its a.width & length in "decimal feet" (ex. 3.58') b.the square footage in "decimal feet" (ex. 24.17 SQ FT) c.the scale used (ex. SCALE 3/8"=1') 3.A drawing of the building elevation showing the placement of SIGN (C) to scale, showing the a."Over all height" of the top of SIGN (C) in "decimal feet" (ex. OAH 16.75') b.Frontage of the building/suite in "decimal feet" (ex. 25') c.Direction that the elevation faces (ex. NORTH ELEVATION) d.the scale used (ex. SCALE 1/4"=1') 4.A construction/electrical diagram of SIGN (C) showing a.Construction details b.Attachment details (number, size and type of anchors) c.Materials used in construction of the wall. (ex. Masonry wall) d.Type of illumination (ex. LED) e.Show & indicate the DISCONNECT SWITCH f.Indicate the AMPS__ VOLTS__ CIRCUITS__ g.Include the following note " 24 Hour programmable times installed to comply with the COT outdoor lighting code" 5.Each page must show a. Name of contractor applying for the permit (ex. Fluoresco) b.Must note page number and number of pages submitted. (ex. Page 1 of 10) Page 4 of the drawings submitted must be marked with an (D). All of the information on the application that pertains to SIGN (D) must also be on Page 4(D) of the drawing. Also include all information as noted in previous comments. Page 5 of the drawings submitted must be marked with an (E). All of the information on the application that pertains to SIGN (E) must also be on Page 5(E) of the drawing. Also include all information as noted in previous comments. Page 6 of the drawings submitted must be marked with an (F). All of the information on the application that pertains to SIGN (F) must also be on Page 6(F) of the drawing. Also include all information as noted in previous comments. Page 7 of the drawings submitted must be marked with an (G). All of the information on the application that pertains to SIGN (G) must also be on Page 7(G) of the drawing. Also include all information as noted in previous comments. Page 8 of the drawings submitted must be marked with an (H). All of the information on the application that pertains to SIGN (H) must also be on Page 8(H) of the drawing. Also include all information as noted in previous comments. Page 9 of the drawings submitted must be marked with an (I). All of the information on the application that pertains to SIGN (I) must also be on Page 9(I) of the drawing. Also include all information as noted in previous comments. Subject to receipt of corrected plans, additional comments may be forth coming. |
|
| 07/24/2015 | SIGN SITE REVIEW | Continued | Meeting pending with Sign Code Staff on 7/29 regarding submittal requirements |