Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 05/20/2015 | SIGN SITE REVIEW | Approved | TOTAL $140.20 | |
| 05/15/2015 | SIGN SITE REVIEW | Correction Required | The sign indicated on application would be considered a freestanding sign not a wall sign Definition of a wall sign is as follows: Wall sign. Any sign that is fastened, attached, connected or supported in whole or in part by a building or structure, other than a sign structure supported wholly by the ground, with the exposed face of the sign in a plane parallel to the plane of the wall. Definition of a freestanding sign is as follows: Freestanding sign. An on-site sign or three-dimensional representation of a figure or object, not attached to any building The following criteria applies for freestanding signs: Sec. 3-61. Freestanding signs. A. Monument type sign, general requirements: 1. Maximum faces: Four (4) per sign. 2. Maximum area: Fifty (50) square feet per face. 3. Maximum height: Ten (10) feet from grade. 4. Minimum setback: Twenty (20) feet from curb to leading edge of sign. B. Low profile type sign, general requirements: 1. Maximum faces: Two (2) per sign. 2. Maximum area: Sixty (60) square feet per face. 3. Maximum height: Eight (8) feet, or less than eight (8) feet if the setback from the curb is less than sixteen (16) feet FREESTANDING SIGNS ARE REQUIRED TO INCLUDE WITH SUBMITTALS: A scaled site plan indicating street frontage, property lines, sight visibility triangles, proposed and existing rights-of-way, location of sign on property and relationship of proposed sign to ingress and egress points. Previously approved site plan can be found @ http://www.tucsonaz.gov/PRO/pro/devactionsrch.jsp |