Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T15OT00449
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
Date | Description | Inspector | Results | Comments |
---|---|---|---|---|
05/18/2015 | SIGN SITE REVIEW | Approved | TOTAL $208.58 | |
04/14/2015 | SIGN SITE REVIEW | Correction Required | This site is within Scenic Corridor Zone The following applies Sec. 3-83. Scenic corridor zone (SCZ) district. A. Location: The scenic corridor zone (SCZ) district includes any portion of property or parcels within four hundred (400) feet, measured in any direction, of the future right-of-way lines of a scenic route, as designated on the Major Streets and Routes (MS&R) Plan map. If any portion of a development is within the SCZ district, the entire development will be treated, for sign purposes only, as though it were entirely within the SCZ district. B. Maximum total attached sign area: 1. For commercial or industrial uses: one and one-fourth (1.25) square feet per foot of building frontage with a minimum allowance of not less than twenty-five (25) square feet and a maximum of two hundred fifty (250) square feet per tenant. Signs must be oriented toward a scenic route, arterial street, collector street, or the interior of the premises. The frontage indicated on application is 74' the allowable sign area would be 92.5 sq ft The proposed signage is 113 sq ft. Note. Panels on monument signs less then 10 sq ft do not need to be permitted. |