Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T14OT00407
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/03/2014 | SIGN SITE REVIEW | Approved | ||
| 06/03/2014 | SIGN SITE REVIEW | Approved | Per D.Roberts inspection 6/3/14, no grade issue, setback off Rook to center of post is 32', setback off Speedway to center of post hole is 26'. Footer hole ok. Wall sign has metal backer board up behind it per permit for facade parapet on east wall. | |
| 05/30/2014 | SIGN SITE REVIEW | Continued | Contractor revised application materials to add an Electronic Message Center to the monument sign. Review continues. NOTE:Dave Roberts recently met contractor on site to look at sign setbacks. New hole location was dug. | |
| 05/06/2014 | SIGN SITE REVIEW | Correction Required | CONTRACTOR SUBMITTED SUPPLEMENTAL INFORMATION FOR MONUMENT SIGN. REVIEW COMMENTS AS FOLLOWS, HOWEVER, UNTIL WALL SIGN BACKER INSTALLED NO PERMITS CAN BE ISSUED. PERMIT T14OT00407 AT: 6167 E SPEEDWAY, THE CAR LOT FOR: NEW MONUMENT SIGN Reviewer: Heather.Thrall@tucsonaz.gov / LeeRay Hanly (for electric) 1) 3-18 - Dimension pole cover, note - engineering will be required if the surface area of the structure is over 60 sqft. Note, footer depth may not be adequate for sign structure if over 60 sqft. 2) 3-77 - Per inspection 5/7/14, move sign location 5 feet west of proposed. Sign location at intersection corner will count as two signs, not allowed off a local and arterial streets under General Business District criteria. 3) Site plan will need revision to setback notations based upon comment #2. 4) 3-18, 3-32, 3-77: No frontages were listed on original site plan or application. Necessary for double check of sign area allowances. 5) Provide dimensioned side view of monument sign depth/thickness per Sign Code Administrator/ 3-18. 6) Electric diagram ok per LeeRay. REVISIONS CAN BE EMAILED TO HEATHER.THRALL@TUCSONAZ.GOV |
|
| 04/08/2014 | SIGN SITE REVIEW | Correction Required | BE ADVISED - INSPECTION FOR PROPOSED MONUMENT SIGN ON SITE THIS DATE SHOWS THE WALL SIGNAGE ON EAST ELEVATION IS NOT MOUNTED ON AN OPAQUE SURFACE. THE CONTRACTOR MAY NOT BE DONE WITH WORK, BUT AT THIS TIME THE SIGNAGE IS SHOWN ON THE GRIDWORK METAL SURFACE ONLY. ALUMINUM BACKER PANEL IS REQUIRED. DO NOT CALL IN FOR ELECTRIC ON WALL SIGNAGE UNTIL SOLID SURFACE INSTALLED BEHIND GRID WORK. NO OTHER SIGN PERMITS ISSUED UNTIL RECTIFIED. |