Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
| Date |
Description |
Inspector |
Results |
Comments |
| 12/03/2012 |
SIGN SITE REVIEW |
|
Approved |
Contractor provided revised sheet showing amps and mounting detail. |
| 11/19/2012 |
SIGN SITE REVIEW |
|
Partial Approval |
Contractor contacted via email with structural reviewer's review of revised drawings submitted via email: "provide amperage & required fasteners (size, quantity & spacing). Eric Newcomb 11.19.12 |
| 11/07/2012 |
SIGN SITE REVIEW |
|
Partial Approval |
Received revised sign permit application from contractor to compare with updated sign construction drawings. review continuing. |
| 11/07/2012 |
SIGN SITE REVIEW |
|
Partial Approval |
Sign permit application and sign area on the plans can be approved. Minor correction needed please: Type, size and number of fasteners/mounting info is missing from sheet 6 of the sign construction detail diagram - along with the type of wall the sign is being anchored to. Contractor emailed with request to return sheet 6 of plans with this info by email to release permit. Also need the number of AMPS and circuits added to sheet 6. |
| 11/02/2012 |
SIGN SITE REVIEW |
|
Partial Approval |
contractor submitted revised drawings by email - proceeding with review and waiting for revised sign permit application with new sign area noted. |
| 10/26/2012 |
SIGN SITE REVIEW |
|
Correction Required |
Original proposal is over allowed sign area. Drawings under revision to recalculate sign area within 3 to 1 ratio allowance based upon tenant's street frontage. (Contractor contacted via email 10/26 with information on how to break sign area down correctly.) |
