Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T12OT01383
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 10/22/2012 | SIGN SITE REVIEW | Approved | All construction drawings, engineering, calculations and site plan details have been approved by Structural, Engineering and Signs. Special inspector has been assigned (Tom Tiedemann from Western Tech.) per contractor's engineer, for expansion anchors on wall signs greater than 30' off the ground. Permit ready to release. | |
| 10/18/2012 | SIGN SITE REVIEW | Partial Approval | Sign contractor forwarded revised drawings and updated special inspection certificate to determine special inspector for expansion anchors (on wall signs greater than 30' off ground). | |
| 10/17/2012 | SIGN SITE REVIEW | Partial Approval | Met with contractor to discuss revisions to the permit package. | |
| 09/27/2012 | SIGN SITE REVIEW | Partial Approval | Sign Code review by Heather Thrall, Sr. Planner - Signs Division 9/27/12 Pending review of structural, electrical, special inspection certificates and scaled site plan with sight visibility triangles - all to be provided shortly YESCO shortly - all proposed signs shown in the permit package for the Aloft Hotel meet City of Tucson Sign Code sign area allowances, height allowances, and setback requirements. NOTE: special inspections are required for signs A, B, D for sign area &/or height off ground. The only clarifications requested thus far on the plans for Sign Code requirements: 1) add sign "G", and sign "F.1." - and their specifications - to the sign permit application 2) add pole cover & notes to sign "F" 3) on permit application, change sign "F" to a "DF" type (double faced monument -a "LP" low-profile needs 2' solid base under sign panel) 4) add note on sign "C" drawing that triangular message panel is to "manually" rotate. 5) remove note from sign "F" drawing that a permit is not required, it will need to be permitted as a traffic directional "SD" (single faced directional) on the permit application 6) remove sheet 9 from permit package set 7) provide all construction specifications, engineering calculations, electrical details as applicable for all signs 8) provide scaled site plan with sight visibility triangles shown for Speedway frontage and Norris frontage. I can be reached at Heather.Thrall@tucsonaz.gov or at 520-837-4951. |