Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: SIGN SITE REVIEW
Permit Number - T12OT00481
Inspection Description - SIGN SITE REVIEW
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 12/20/2012 | SIGN SITE REVIEW | Approved | new site plan was submitted showing the recently 2nd proposed menu board out of the loading zone, and showing (2) incidental "order here" signs over drive thru. | |
| 10/19/2012 | SIGN SITE REVIEW | Correction Required | Review comments for T12OT00481, McDonald's 5445 E. Speedway REVIEWER: HEATHER THRALL (Heather.Thrall@tucsonaz.gov or 520-837-4951) The following review comments remain from 10/9 email to contractor/sign runner; 1) A menu board cannot be installed in an existing, approved loading zone. Per Zoning Review, the loading zone is no longer required for restaurants under 5000 sqft. To remove loading zone from plan requires revision to development plan DP12-0051. (This change can be reviewed in "walk-thru"). This DP was reviewed only for area noted on the plan "SP1.A." for accessibility and parking. Provide barrier between signage and vehicular use (i.e. curbing or bollards) and the shed relocation depicted on plan was not reviewed for minimum setbacks against adjacent residential zone. Contact Steve Shields at 520-837-4956 or Steve.Shields@tucsonaz.gov 2) Clarify if "Welcome" canopy signage on building plans T11CM03080 is to be installed. If applicable, show construction, dimensions on sign plans - limit to max of 2 square feet area (to be incidental sign) or mounted to wall. And add to application. 3) Per email by permit runner, "pre-sell board" removed in revision. Clarify if "pre-sell board" is staying or being removed. If applicable, remove references to that sign from all resubmitted sign plans. If staying, note location on "red noted" site plan to match the SP.1. site plan. 4) A revised sign permit application is required to accurately depict all signs types, dimensions, heights and correct amount. Signs staff is willing to assist with this, contact reviewer with clarifications on the above first. 5) An excavation inspection is required for footers on all types of freestanding signs. Footer excavation inspection is done under sign permit, which is released to sign contractor. The footers for the signs were not shown on the sign construction drawings, but were shown on building plan T11CM03080. Clarify who will be responsible for the excavation and installation of the sign footers. If footer excavation/installation to be done by general contractor, that inspection will be added to building permit and an additional fee of $82.50 will be assessed. 6) The sign permit can only be released to the licensed sign contractor unless the contractor provides a written/signed statement allowing a 3rd party (sign permit runner in this case) to obtain the permit on their behalf. 7) Note an $82.50 fee is being assessed for review of the revision to the sign package for structural/electrical review. Please provide the total number of electrical circuits required for this revised sign package. |
|
| 10/09/2012 | SIGN SITE REVIEW | Not ready for Inspection | Client has chosen to revise signs proposed in drive thru - requires additional review now for new signs/locations. | |
| 10/05/2012 | SIGN SITE REVIEW | Approved | Building plans were paid for and permit issued. Can release permit. | |
| 07/20/2012 | SIGN SITE REVIEW | Approved | Still waiting for building plan to be issued, T11CM03080, before the sign permit can be issued. Other than that, the sign package is approved - and has been approved since March 28th. | |
| 03/28/2012 | SIGN SITE REVIEW | Approved | PROPOSAL APPROVED. PERMIT ABLE TO BE RELEASED UPON APPROVAL OF BUILDING PLAN #T11CM03080 |