Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: INSP - FOLLOW UP CODE ENFORCE
Case Number - T12DV08848
Inspection Description - INSP - FOLLOW UP CODE ENFORCE
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/21/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | At court, Defendent responsible. Close case. | |
| 05/23/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site, inspected property, the tabe saw and grinder have been removed. | |
| 04/25/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | Site inspection with Carlos P. No grinding noise. | |
| 04/10/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site with Carlos P.. Hand delivered citation. | |
| 04/08/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | Went out twice this past Saturday, April 6th. Found the workers were grinding at 11:25 am. I did not see the grinding but I could definitely hear it from the neighboring property's driveway, just south of the tall structure which abutts the property line. CR | |
| 01/23/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | Received an e-mail from Tracy W. to check up on the cuttng and grinding granite. I went to 2229 S. Mission and spoke to the owner, Jodie B. While I was there, approximately 45 minutes, there was no loud grinding noises. She did state that work was being done after hours late at night. | |
| 01/15/2013 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site, sposke to owner, Lou. He stated that he's moving the table saw. He gave me an archtectual letter stating his progress with PDSD. Letter scanned in SIRE. F/U 30 days. | |
| 12/13/2012 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site, met with owner, Lou. Explained the issues with zoning and also needs a C of O. Owner is in violation of site plan. F/U 30 days. | |
| 11/29/2012 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site with Inspector Goodman. The rear gate was open so we could see where the granite was being cut and sanded/ground down. Found a granite table saw being used. Spoke to owner, Lou. Explained to him that he was in violation of zoning C-2 regulations, hand tools only. The owner started up the table saw and cut a three foot piece of granite. The saw cuts about 12" per minute and hardly made any noise. Inspector Goodman and I both agreed that the two employees with the hand grinders/sanders were more noisy and created more dust than the table saw. Still, the table saw violates the Tucson Code. There is also an illegel structure attached to the main building. F/U 30 days. | |
| 11/27/2012 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site, spoke to neighbors, said grinding noise is going on. Property owner has installed a wooden fence around the chain-link fence so you can't see in. He also draped a sunscreen down from the roof. Will check records with DSD about covered storage area on site plans. | |
| 10/25/2012 | INSP - FOLLOW UP CODE ENFORCE | Approved | At site, spoke to several neighbors about dust and noise. Landlord said she can't get tenants to stay because of the noise. Other neighbors complained about the dust, coughing and breathing issues. While I was there the noise was okay and there was no dust. Ask the neighbors to call me if noise and dust continue. F/U 30 days |