Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: PLUMBING - FINAL
Permit Number - T12CM02886
Inspection Description - PLUMBING - FINAL
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 07/27/2012 | PLUMBING - FINAL | Approved | IVRS - Inspection :* | |
| 07/25/2012 | PLUMBING - FINAL | Not ready for Inspection | 1. Read the notes from 07/19/12 and comply. | |
| 07/19/2012 | PLUMBING - FINAL | Not ready for Inspection | IVRS - Inspection :* | |
| 07/18/2012 | PLUMBING - FINAL | Cancelled | IVRS - RI canceled | |
| 07/03/2012 | PLUMBING - FINAL | Denied | 1. This activity is in renewed status. Southwest Gas will not connect services until they meet minimum standard. 2. Reference: 2006 UPC 1211.1.2 (A) Underground piping systems shall be installed with a minimum of 18" of cover. Where external damage is not likely to result, the minimum cover shall be 12". Where a minimum of 12" of cover cannot be provide, the pipe shall be installed in a conduit, or shielded. NFPA 54: 7.1.2.1 2. Reference: 2006 UPC: 1211.1.7 (C) An electrically continuous corrosion resistant tracer wire (minimum AWG 14) or tape shall be buried with the plastic pipe to facilitate locating. One end shall be brought above ground at a building wall or riser. NFPA 54: 7.1.7.3 House Bill 2256. Note. Only one tracer was provided for two services. Tracer wire did not extend to above grade. Was a manual shut off valve provided at each building? These corrections only address concerns of Southwest gas, and are not intended to be a complete reinspection. |