Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: INSP - FULL
Case Number - T09FR00029
Inspection Description - INSP - FULL
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 01/15/2009 | INSP - FULL | Approved | All corrections have been made. | |
| 12/31/2008 | INSP - FULL | Revision | YOU WILL SWITCH YOUR K EXTINGUISHER WITH YOUR ABC EXTINGUISHER SO THAT IT IS EVIDENT THAT THIS IS THE EXTINGUISHER TO USE IN THE EVENT OF A KITCHEN GREASE FIRE. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 1006.1 Illumination required. The means of egress, including the exit discharge, shall be illuminated at all times the building space served by the means of egress is occupied. CORRECTION: CAUSE YOUR EMERGENCY LIGHTS TO WORK PROPERLY BY REPLACING THE BULBS OR BATTERIES OR BOTH. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 1008.1.8.2 Hardware height. Door handles, pulls, latches, locks and other operating devices shall be installed 34 inches (864 mm) minimum and 48 inches (1219 mm) maximum above the finished floor. Locks used only for security purposes and not used for normal operation are permitted at any height. CORRECTION: YOU WILL REMOVE THE BOLT LOCK ON YOUR FRONT EXIT. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 1008.1.8.4 Bolt locks. Manually operated flush bolts or surface bolts are not permitted. CORRECTION: YOU WILL REPLACE YOUR SLIDE BOLT LOCK WITH A THUMB TURN BOLT LOCK, OR A KEYED LOCK, PROVIDING THERE IS A SIGN ABOVE YOUR FRONT EXIT THAT READS " THIS DOOR TO REMAIN UNLOCKED WHILE THE BUILDING ISOCCUPIED." |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 505.1 Address numbers. New and existing buildings shall have approved address numbers, building numbers or approved building identification placed in a position that is plainly legible and visible from the street or road fronting the property. CORRECTION: YOU WILL HAVE YOUR ADDRESS NUMBERS PLACED ON THE SIGN ON THE STREET SO THAT IT IS LEGIBLE FROM BOTH DIRECTIONS OF TRAVEL ON HOUGHTON. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 1004.3 Posting of occupant load. Every room or space that is an assembly occupancy shall have the occupant load of the room or space posted in a conspicuous place, near the main exit or exit access doorway from the room or space. Posted signs shall be of an approved legible permanent design and shall be maintained by the owner or authorized agent. CORRECTION: YOU WILL POST YOUR OCCUPANCY LOAD IN A CONSPICUOUS PLACE. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 1028.4 Exit signs. Exit signs shall maintained in accordance with Section 1011 of the 2006 IFC. Your main exit sign is not lit. CORRECTION: YOU WILL CAUSE YOUR MAIN EXIT SIGN, AND ALL OTHER EXIT SIGNS TO BE LIT AT ALL TIMES BY CHANGING BULBS, BATTERIES, OR BOTH. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 904.11.6.3 Cleaning. Hoods, grease-removal devices, fans, ducts and other appurtenances shall be cleaned at intervals necessary to prevent the accumulation of grease. Cleanings shall be recorded, and records shall state the extent, time and date of cleaning. Such records shall be maintained on the premises. YOUR HOOD SUPRESSION SYSTEM HAS AN ACCUMULATION OF GREASE THAT CAN CAUSE IT TO NOT WORK PROPERLY IN THE EVENT OF A FIRE. THIS IS AN IMMEDIATE HAZARD THAT MUST BE DEALT WITH ASAP. CORRECTION: IN ORDER TO AVOID A CITATION, YOU HAVE UNTIL TUESDAY 1/06/09 TO HAVE YOUR HOOD SUPRESSION SYSTEM CLEANED FROM FILTER, THROUGH THE DUCT WORK UP TO THE ROOF. |
|
| 12/31/2008 | INSP - FULL | Violation | PROBLEM: IFC 605.6 Unapproved conditions. Open junction boxes and open-wiring splices shall be prohibited. Approved covers shall be provided for all switch and electrical outlet boxes. 1) YOUR CIRCUIT BREAKER BOX HAS OPEN WIRING. 2) YOU ARE MISSING A FACEPLATE ON A SWITCH ON YOUR FREEZER 3) THERE IS MISSING FACE PLATE IN YOUR DESERT ROSE ROOM 4) THERE IS OPEN WIRING ON YOUR OUTDOOR LIGHTING POLE NEAR THE WATER DISPENSER. CORRECTION: YOU WILL PLACE BLANKS IN YOUR OPEN CIRCUITS IN THE BREAKER BOX. YOU PLACE FACEPLATES OVER ANY OPEN SWITCHES OR WALL SOCKETS. YOU WILL PLACE ALL OPEN WIRING IN A PROPER JUNCTION BOX. |