Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Case: T07FR00121

Parcel: 133231400


Addresses:

7805 E BROADWAY BL

Inspection Status: Correction Required

Inspection History: VIOL - BUILDING SVCS & SYSTEMS

Date Description Inspector Results Comments
01/16/2007 VIOL - BUILDING SVCS & SYSTEMS Correction Required TFC 605.1 - Abatement of electrical hazards. Identified electrical hazards shall be abated.

_____ Mount electrical box at salsa bar.

_____ Close/repair panel door labled "Fryer Hood Fan" in electrical room.
01/16/2007 VIOL - BUILDING SVCS & SYSTEMS Correction Required TFC 605.6 - Open junction boxes and open-wiring splices shall be prohibited. Approved covers shall be provided for all switch and electrical outlet boxes.

_____ Cover wires in an approved manner, under dessert cooler

_____ Cover wires in an approved manner, electric box, freezer.

_____ Cover wires in an approved manner, switchplate cover outside office.
01/16/2007 VIOL - BUILDING SVCS & SYSTEMS Correction Required TFC 605.4 - Multiplug adapters, such as cube adapters, unfused plug strips or any other device not complying with the ICC Electrical Code shall be prohibited.

_____ Remove multi-plug adaptor (or replace with one having circuit protection), above drive-through monitor.

_____ Remove multi-plug adaptor (or replace with one having circuit protection), kitchen west wall near cooler.
01/16/2007 VIOL - BUILDING SVCS & SYSTEMS Correction Required TFC 605.2 - Illumination shall be provided for service equipment areas, motor control centers and electrical panelboards.

_____ Replace bulb in electrical room.
01/16/2007 VIOL - BUILDING SVCS & SYSTEMS Correction Required TFC 605.3.1 - Doors into electrical control panel rooms shall be marked with a plainly visible and legible sign stating ELECTRICAL ROOM or similar approved wording.

_____ Provide such signage for electrical room doors outside back of building.