Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Inspection History Details

Permit: T07CM04347

Parcel: 14029051A

Inspection Status: Approved

Inspection History: BUILDING PRE-SLAB

Date Description Inspector Results Comments
06/17/2008 BUILDING PRE-SLAB Approved IVRS - Inspection :*
DUMPSTER GROUT & SLAB OK
06/13/2008 BUILDING PRE-SLAB Not ready for Inspection IVRS - Inspection :*
06/11/2008 BUILDING PRE-SLAB Not ready for Inspection IVRS - Inspection :*
05/13/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
OK TO POUR S&W POUR BACK TO ENTRANCE ALL EXCEPT INTERIOR COLUMNS
05/08/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
E AND W ENTRANCE OK FOR POUR BACK
NW DECK POUR OK
PUDDLE WELDS AND MECH SPECIAL INSPECTED
EXCEPT STAIRWELL LANDINGS
05/06/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
2ND FLOOR A TO C 6.3-11.0 OK TO POUR POURBACKS ALL EXCEPT ENTRIES OK TO POUR DECKING WELDS SPECIAL INSPECTED.
05/01/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
2ND FLOOR DECK WELDS SPECIAL INSPECTED
OK TO POUR C TO D 1 TO 11 WIRE & REBAR IN PLACE
04/30/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
PANELS 1, 2, 4, 5, 14, 7, 8, 9, 10, 25
OK FOR POUR BACK
04/29/2008 BUILDING PRE-SLAB Not ready for Inspection IVRS - Inspection :*
S6.1 (102) NEEDS SPECIAL INSPECTION FOR ANY EPOXY
03/27/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
NW CORNER OF SLAB
03/26/2008 BUILDING PRE-SLAB Not ready for Inspection IVRS - Inspection :*
03/17/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
PRE-SLAB AT GRID LINES 6.3 TO 10.9/A.2 TO C.1
SPECIAL INSPECTION COMPLETED
03/06/2008 BUILDING PRE-SLAB Partial Approval IVRS - Inspection :*
SLAB NEEDS TO BE 4" AND REBAR CENTERED
BLDG 2 C1 TO C9 1.1 TO 10.6