Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit: T05CM01569

Parcel: 13316021C


Addresses:

6616 E GRANT RD


Inspection Status: Approved

Inspection History: PLUMBING - FINAL

Permit Number - T05CM01569

Inspection Description - PLUMBING - FINAL

Inspection Status - Approved

Date Description Inspector Results Comments
03/13/2006 PLUMBING - FINAL Approved IVRS - Inspection :*
03/12/2006 PLUMBING - FINAL Not ready for Inspection IVRS - Inspection :*
03/07/2006 PLUMBING - FINAL Not ready for Inspection IVRS - Inspection :*
10 PSI TEST TO ALL APPLIANCES OK
1. CALL IN 03005 AND 03090, 03040
2. PROVIDE REDLINE & APPROVED REVISED PLAN ON SITE
3. PROVIDE IN HOUSE BACKFLOW CERTIFICATION
02/17/2006 PLUMBING - FINAL Denied IVRS - Inspection :
See detailed listing on site.| 999*
CALL IN ALL PLUMBING INSPECTIONS THAT HAVE NOT BEEN APPROVED. DO ALL REQUIREMENTS FROM PAST INSPECTIONS.
02/03/2006 PLUMBING - FINAL Denied IVRS - Inspection :
See detailed listing on site.| 999*
03005 - PROVIDE RED LINE & REVISED PLAN ON SITE PER 6/20/05 INSPECTION REQUEST THAT REPRESENTS YOUR INSTALLATION
03052 - EXPOSE ALL GAS APPLIANCE LISTING PLATES FOR VIEWING
03090 - SEE NOTES FROM 1/27/06 INSPECTION #1, #3, #4, #5, #9 PAINT EXPOSE SANITARY VENTS ON ROOF THAT ARE ABS PLASTIC MAKE ALL PLUMBING FIXTURES WATER TIGHT IN KITCHEN AREA.
01/27/2006 PLUMBING - FINAL Not ready for Inspection IVRS - Inspection :*
1. INSTALL ALL CLEANOUT PLUGS & COVERS
2. PROVIDE TEST GAUGE IN 1/10 POUND INCREMENTS FOR TESTING GAS PIPING
3. PROVIDE SAFETY CABLES FOR ALL GAS APPLIANCES ON WHEELS.
4. INSTALL ALL EQUIPMENT THAT REQUIRE PLUMBING CONNECTION
5. CALL IN ALL PLUMBING INSPECTIONS THAT HAVE NOT BEEN APPROVED
6. TERMINATE WATER HEATER T&P DRAIN AT 90 DEG. DOWN
7. PROVIDE 3-GALV SCREWS AT EACH JOINT OF WATER HEATER FLUE VENT PIPING.
8. PROVIDE 2' ABOVE PARAPET TERMINATION OF WATER HEATER VENT WHEN WITHIN 8'
9. SANITARY VENT WITHIN 10' OF COOLER INTAKE TO BE 3' ABOVE TOP OF COOLER INTAKE THIS MAY NOT BE A COMPLETE LIST