Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Approved
Inspection History: PLUMBING - GAS PRESSURE TEST
| Date |
Description |
Inspector |
Results |
Comments |
| 06/08/2004 |
PLUMBING - GAS PRESSURE TEST |
|
Approved |
|
| 06/03/2004 |
PLUMBING - GAS PRESSURE TEST |
|
Partial Approval |
IVRS - Inspection :*/ 1) MUST REMOVE MECH. TAPE AND USE THREE SHEET METAL SCREWS PER JOINT AND AT APPLIANCE COLLAR. 2) MUST REMOVE PLYWOOD UNDER WTR HTR OR INSTALL SHEET METAL ON TOP OF PLYWOOD. 3) T&P DRAIN HAS BACKPITCH. 4) MUST SEAL GAS LINE PENETRATION ON EXTERIOR WALL. 5) GAS PRESSURE TEST IS OK. |
