Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Approved
Inspection History: PLUMBING - FINAL
| Date |
Description |
Inspector |
Results |
Comments |
| 05/21/2004 |
PLUMBING - FINAL |
|
Approved |
IVRS - Inspection :* |
| 05/18/2004 |
PLUMBING - FINAL |
|
Not ready for Inspection |
IVRS - Inspection :* |
| 04/19/2004 |
PLUMBING - FINAL |
|
Not ready for Inspection |
IVRS - Inspection 0000*/ 10 PSI MIN. FOR 15 MIN. ON ENTIRE SYSTEM. PROVIDE PROPER BONDING OF BLD GAS SYSTEM. 3) USE APPROVED FITTINGS AT ALL PIPE CONNECTION LOCATIONS. 4) WHERE UNIONS ARE REQUIRED LEFT/RIGHT NIPPLES AND COUPLINGS SHALL BE USED. 5) PROVIDE 12" MIN. COVER FOR ALL UNDERGROUND PIPING. 6) PRIME AND TAPE ALL UNCOATED PIPING AND FITTING. 7) RISER AT METER SHALL BE SCOTCH COATED UNDERGROUND AND FITTING TO BE PRIMED AND TAPED. |
| 03/03/2004 |
PLUMBING - FINAL |
|
Denied |
1) MUST PROVIDE AIR PRESSURE TEST ON SYSTEM 10 LBS MIN. 2) MUST REMOVE UNION IN LINE UNDERGROUND AND TAPE PRIMER AND 10 MIL TAPE ALL JOINTS UNDERGROUND. 3) MUST SCREW DOWN WTR HTR FLU VENT TO VENT CONNECTOR WITH THREE SHEET METAL SCREWS PER JOINT. 4) MUST EXTEND T&P DRAIN AND TERMINATE 6" ABOVE FLOOR. 5) MUST CHANGE SHUT OFF VALVE FOR KITCHEN RANGE TO AN AGA OR CSA VALVE. |