Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: PLUMBING - FINAL
Permit Number - T03PL01875
Inspection Description - PLUMBING - FINAL
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 01/21/2004 | PLUMBING - FINAL | Approved | 1) SOIL WATER TEST FOR RAIN HEADERS IN BLDG. J LEVEL P-1 BETWEEN COLUMN YY AND XX AND GRID 27, TO 28 AS NOTED ON PLAN 2) SOIL WATER TEST FOR WASTE AND VENT SYSTEM BLDG C P-2 LEVEL EAST SIDE OF WING | |
| 01/16/2004 | PLUMBING - FINAL | Not ready for Inspection | IVRS - Inspection 0000* | |
| 01/15/2004 | PLUMBING - FINAL | Not ready for Inspection | CODE VIOLATION ON WATER HEATER VENT NOT TO CODE. PROVIDE PROPER CLEARANCE ON SINGLE WALL. REMOVE DRYER VENT FROM WTR HTR. READ OVER ALL REQUESTS FROM LAST INSP. MAKE ALL CORRECTIONS AND CALL AGAIN FOR INSP. | |
| 11/28/2003 | PLUMBING - FINAL | Not ready for Inspection | IVRS - Inspection 0000*/ 1) PLEASE BOND GAS LINE. 2) FLUE VENT FOR WATER HTR AND WALL HTR TO EXTEND 3' ABOVE COOLER. 3) PLEASE HARD PIPE THRU WALL, PROVIDE AGA OR CSA APPROVED GAS VALVE AND FLEX TO WALL HTR. | |
| 11/26/2003 | PLUMBING - FINAL | Denied | IVRS - Inspection 0999*/ 1) MUST REMOVE AND REPLACE T&P VALVE. 2) MUST CUT OFF THREADS AT END OF T&P DRAIN. 3) MUST HARD PIPE GAS LINE TO WALL FURNACE. 4) MUST LOCATE SHUT OFF VALVE UPSTREAM OF FLEX CONNECTOR. 5) MUST SCREW DOWN WTR HTR FLU VENT WITH [3] SHEET METAL SCREWS PER JOINT. 6) RE-TEST ENTIRE SYSTEM. |