Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit: T03CM05443

Parcel: 141175260

Inspection Status: Approved

Inspection History: EXT METAL CLIPS/EXT SHEATHING

Permit Number - T03CM05443

Inspection Description - EXT METAL CLIPS/EXT SHEATHING

Inspection Status - Approved

Date Description Inspector Results Comments
04/16/2004 EXT METAL CLIPS/EXT SHEATHING Approved IVRS - Inspection 0000*/ 1) NOTE: HANGERS NOT INSTALLED FOR LIVING ROOM. LEAVE TEMP WALL STANDING
03/29/2004 EXT METAL CLIPS/EXT SHEATHING Partial Approval IVRS - Inspection 0000*/ 1) HANGER SIZE ON PLAN GARAGE, TRUSSES BOTH SIDES OF I BEAM 2) MISSED P.A. NEED RETRO FIT TYPE
01/15/2004 EXT METAL CLIPS/EXT SHEATHING Not ready for Inspection IVRS - Inspection 0000*/ 1) NO DETAIL FOR GARAGE BEAM HANGERS, ROOF JOG ABOVE 2) NO DETAIL FOR CENTER BEARING TRUSS TO TRUSS CONNECTION 3) 4/SD4 CALLS FOR PANELS BETWEEN TRUSSES QUEST. SPACE AT EXTERIOR WALLS BETWEEN FLOORS IS A PLYWOOD BAND REQUIRED ACROSS SPACE, PERPENDICULAR AND PARALELL 4) CONTINUE BEARING FROM FLOOR TO FLOOR CONCENTRATED LOAD 5) SHEAR AT SLIDER TO CONTINUE TO H.D. 6) NEED A DETAIL SHOWING SNUB NOSE TRUSSES 1/SD3 6) INSTALL ALL SHEAR PANELS BETWEEN TRUSSES 7) INSTALL ALL TRUSS LATERAL BRACES 8) INSTALL ALL END GABLE KICK BRACES 9) NEED REAR DECK PLAN RAILING 10) BLOCK UNDER END OF PLY ROOF 8' 11) OK TO DRY IN DON'T LOAD