Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Approved
Inspection History: PLUMBING - GAS RECONNECT
| Date |
Description |
Inspector |
Results |
Comments |
| 06/25/2003 |
PLUMBING - GAS RECONNECT |
|
Approved |
IVRS - Inspection 0000*/ 1) CORRECTIONS HAVE BEEN MADE, LEFT GAS CARD |
| 06/19/2003 |
PLUMBING - GAS RECONNECT |
|
Partial Approval |
IVRS - Inspection 0000*/14 PSI TEST IS OK. P&T DRAIN LINE IS FLATTENED AND ALMOST KINKED. MUST MAINTAIN 3/4" DIAMETER THE ENTIRE LENGTH OF PIPE. RECOMMEND USING ELBOWS. WILL LEAVE GAS CARD AFTER CORRECTION HAS BEEN MADE. |
| 06/11/2003 |
PLUMBING - GAS RECONNECT |
|
Denied |
IVRS - Inspection 0999*/ 1) MUST REPLACE P & T VALVE FOR WATER HEATER AND REMOVE FLEX LINE IN P & T DRAIN 2) MUST SCREW DOWN FLU VENT TO APPLIANCE COLLAR AND ALL JOINTS WITH (3) SHEET METAL SCREWS PER JOINT 3) MUST PROVIDE AGA OR CSA GAS SHUT OFF VALVE FOR RANGE 4) IF GAS RANGE IS NOT AVAILABLE AT TIME OF INSPECTION THEN CAP OFF GAS VALVE UNTIL APPLIANCE HAS ARRIVED 5) RETEST SYSTEM 10 POUND MINIMUM |