Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: FRAMING
Permit Number - T03CM02730
Inspection Description - FRAMING
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 10/01/2003 | FRAMING | Approved | IVRS - Inspection 0000*/ 1) ENGINEERS STAMP ON BOLT TEST WAS APPROVED, PER TEST PAPER WORK SENT TO RECORD SECTION DSC | |
| 09/17/2003 | FRAMING | Partial Approval | IVRS - Inspection 0000*/ 1) SEE HISTORY JOB 2) WRONG SIZE BOLTS IN H.D.'S 8A NEED MINIMUM 5/8" INSTALLED | |
| 08/27/2003 | FRAMING | Not ready for Inspection | IVRS - Inspection 0000*/ 1) TIGHTEN ALL H.D. BOLTS 2) MOVE PEX HALL CAN 3) LEAVE WATER PRESS ON 4) WRONG SIZE BOLTS IN H.D.'S 8A NEED MINIMUM 7/8" 5) BACKING AT TUB | |
| 08/14/2003 | FRAMING | Not ready for Inspection | IVRS - Inspection 0000*/ 1) LINE SETS NOT COMPLETE A/C 2) ALL H.D.'S NOT COMPLETE 3) A.B. NEEDED MARKED ON PLATES 4) BACKING WHERE MARKED 5) RANGE VENT 6) DROP IN FURNACE ROOM 7) TUB BACKING 8) 12" CAN LITE TO PEX |