Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Not ready for Inspection
Inspection History: MECHANICAL - HOODS
Permit Number - T03CM00514
Inspection Description - MECHANICAL - HOODS
Inspection Status - Not ready for Inspection
Date | Description | Inspector | Results | Comments |
---|---|---|---|---|
08/10/2012 | MECHANICAL - HOODS | Not ready for Inspection | THIS HAS OTHER HISTORY FOR DENIED ELECTRICAL. PROVIDE ELECTRICAL HISTORY. PLEASE CHECK ALL HISTORY | |
02/17/2012 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* 1) REMOVE ANY SHARP EDGES ON STAINLESS STEEL |
|
09/16/2011 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* | |
08/03/2011 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* | |
02/10/2011 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* | |
04/09/2010 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* 1) OK TO PROCEED WITH FIRE SUPRESSION SYSTEM |
|
10/30/2009 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* 1) PROVIDE GREASE THRU FOR FILTERS |
|
05/20/2009 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* INSTALL MUA PER OUR CONVERSATION REPAIR CRACKS IN HOODS SEAL HOOD AND WALL FLASHING AS NEEDED |
|
11/24/2008 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* PROVIDE MAKE UP AIR DUCT |
|
11/21/2008 | MECHANICAL - HOODS | Denied | IVRS - Inspection : See detailed listing on site.| 999* CALLED AT 8:55 LEFT MESSAGE FOR 30 MIN. LEAD TIME SHOWED UP AT 9:46 -- NO ONE ON SITE |
|
05/28/2008 | MECHANICAL - HOODS | Cancelled | IVRS - RI canceled | |
05/28/2008 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* DUCT WRAP OK, OK TO HANG HOODS |
|
01/25/2008 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* MAKE UP AIR ATTACHED TO FRONT OF HOOD OK NOT REQUIRED TO HEAT MAKE UP AIR |
|
07/27/2007 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection :* MAKE UP AIR MUST COMPLY WITH SECTION 508.1.1 2003 IMC PROVIDE DUCT HEATERS FOR EVAP COOLERS OR PROVIDE COMPENSATING HOODS. CHECKED WELDS ON GREASE DUCTS. OK TO PROCEED. YOU COULD ALSO INSTALL DIFFUSERS AGAINST THE HOOD WITH A GRILLE THAT WOULD SPREAD THE AIR ACROSS THE CEILING. |
|
02/05/2007 | MECHANICAL - HOODS | Denied | IVRS - Inspection : See detailed listing on site.| 999* 1) PLANS DO NOT SHOW ANY DETAILS OR PLAN FOR TYPE I HOODS, MAKE UP AIR, EXHAUST FANS 2) WALL AND CEILING ARE WOOD FRAMED NEED 18" CLEARANCE-ONLY 1 HOOD IS COMPENSATING 3) PROVIDE AN ENGINEERED PLAN APPROVED BY THE CITY OF TUCSON 4) HOODS ARE 8' LONG EACH |