Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: ELECTRIC - INTERMEDIATE
Permit Number - T02CM03799
Inspection Description - ELECTRIC - INTERMEDIATE
Inspection Status - Approved
Date | Description | Inspector | Results | Comments |
---|---|---|---|---|
09/26/2003 | ELECTRIC - INTERMEDIATE | Approved | IVRS - Inspection 0000* | |
04/01/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000*OK WALLS AND HARD CEILIING AREA 2B. | |
03/28/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000*MEET WITH CONTRACTOR AND MARKED WALL TO BE OPENED FOR INSPECTIONS. BATHROOMS: 1.) SUPPORT M/C CABLE AND CONDUITS AS PER CODE. OK AT PANEL 202 WALL. |
|
03/27/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000*BOND 12 X 12 ENCLOUSER OK 3/4 EMT ELEVATOR CIRCUITS. OK 4- 3/4 EMT TO 12 X 12. OK 3 - 3/4 EMT TO 2ND FLOOR. OK FIRE ALARM CONDUIT OLD SES ROOM. |
|
03/26/2003 | ELECTRIC - INTERMEDIATE | Denied | IVRS - Inspection 0999*1.) AREA 2-B COVERED WITHOUT INSPECTION PLEASE REMOTE SHEET ROCK FOR INSPECTION (ONE SIDE). | |
03/14/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000*OK HOUSE METER TO MAIN LUGS. | |
03/05/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000* | |
03/03/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000*OK 2 `/1" CONDUIT RUNS NOW HAVE LESS THAN 360 IN RUNS. | |
02/26/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000* | |
02/20/2003 | ELECTRIC - INTERMEDIATE | Partial Approval | IVRS - Inspection 0000*OK 2ND FLOOR EAST SIDE. 2.) LETTER ON OK USE OF MC IN FILES. |
|
02/13/2003 | ELECTRIC - INTERMEDIATE | Not ready for Inspection | IVRS - Inspection 0000*1.) SUPPORT M/C CABLE AS PER CODE WITHIN 12" FROM BOXES 2.) PLASTER RINGS NEEDS TO BE INSTALLED. 3.) SUPPORT CONDUITS AS PER CODE. 4.) TIGHTEN LOOSE FITTING. 5.) PLEASE PROVIDE A LETTER AUTHURIZING USE OF M/C CABLE FROM ENGINEER. |