Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: MECHANICAL - HOODS
Permit Number - T02CM02674
Inspection Description - MECHANICAL - HOODS
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 12/13/2002 | MECHANICAL - HOODS | Approved | IVRS - Inspection 0000* | |
| 12/11/2002 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection 0000* | |
| 11/20/2002 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection 0000* 1.) PROVIDE MORE BANDING AT TOP SECTION OF GREASE DUCT. 2.) PROVIDE CLEANOUT ACCESS TO GREASE DUCT. SEE MANFACTURERS DETAIL. 3.) HOOD REQUIRES 1/2" ROD FOR HANGING. 4.) PROVIDE AN ACCESS PANEL IN CEILING NEAR HOOD. |
|
| 11/18/2002 | MECHANICAL - HOODS | Partial Approval | IVRS - Inspection 0000* 1.) ANY EXPOSED WOOD WITHIN 18" OF THE SIDE OF THE HOOD MUST BE COVERED WITH SHEET ROCK. 2.) PROVIDE AN APPROVED ACCESS OPENING FOR CLEAN OUT IN GREASE DUCT AT CHANGE OF DIRECTION. WELDS ON GREASE DUCT ARE OK OK TO PROCEED W/FIRE WRAP. SEE MANUFACTURERS INSTRUCTIONS FOR PROPER ACCESS OPENING. |