Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: FRAMING
Permit Number - T02CM01313
Inspection Description - FRAMING
Inspection Status - Approved
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 05/29/2002 | FRAMING | Approved | IVRS - Inspection 0000* | |
| 05/16/2002 | FRAMING | Partial Approval | IVRS - Inspection 0000*/ 1) MECHANICAL INTERMEDIATE: NEED VARIANCE FROM D. MANN (791-550) RE: LENGTH OF DRYER VENT 2) FRAMING WILL BE APPROVED UPON APPROVAL OF DRYER VENT | |
| 05/15/2002 | FRAMING | Denied | IVRS - Inspection 0999*/ 1) H2.5'S ON LEDGER NOT INSTALLED CORRECTLY-(SEE DRAWING ON EDGE OF 3RD STUD) 2) STRAPS AT ELECTRIC HOME RUNS MUST BE STRUCTURAL FHA STRAPS AND MUST BE NAILED PER SIMPSON SPECC. (3 NAILS EACH END) | |
| 05/14/2002 | FRAMING | Denied | IVRS - Inspection 0999*/ 1) REPLACE BANG PLATES WITH FULL LENGTH FHA STRAPS AT ELECTRIC HOME RUNS (NOTE: IF YOU DRILL THE HOLE AT ELAST 2 X DIAMETER APPART, THEN NO STRAP IS REQUIRED) 2) DRYER VENT EXCEEDS LENGTH ALOOWED BY CODE 3) CLIP STAIRWAY LANDING LEDGER TO STUDS 4) RESTORE FRAMING AND ELECTRIC AT RELOCATED WINDOW |