Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Approved
Inspection History: PLUMBING - FINAL
| Date |
Description |
Inspector |
Results |
Comments |
| 10/17/2002 |
PLUMBING - FINAL |
|
Approved |
IVRS - Inspection 0000* |
| 10/14/2002 |
PLUMBING - FINAL |
|
Denied |
IVRS - Inspection 0999* |
| 10/03/2002 |
PLUMBING - FINAL |
|
Denied |
IVRS - Inspection 0999*1.) SYSTEM MUST HOLD A MINIMUM OF 10# AIR TEST. |
| 05/09/2002 |
PLUMBING - FINAL |
|
Not ready for Inspection |
IVRS - Inspection 0000* |
| 01/30/2002 |
PLUMBING - FINAL |
|
Denied |
IVRS - Inspection 0999*1.) SEE NOTE #2 FROM 01/09/02 THIS MEANS YOU MUST INSTALL TWO LOUVRES IN THE ENCLOSURE DOOR. ONE TO BE WITHIN THE UPPER TWELVE INCHES OF THE ENCLOSING; THE OTHER WITHIN THE LOWER TWELVE INCHES OF THE ENCLOSURE. |
| 01/09/2002 |
PLUMBING - FINAL |
|
Denied |
IVRS - Inspection 0999* |
| 12/18/2001 |
PLUMBING - FINAL |
|
Denied |
IVRS - Inspection 0999*1.) A FLEX CONNECTOR MAY NOT PASS THROUGH A WALL OR A PARTITION. HARD PIPE INTO THE ENCLOUSURE AND RETEST TO 10# 2.) EXTEND T & P RELIEF DRAIN TO WITHIN 6" AFF 3.) FLEX CONNECTOR FOR WATER HEATER EXCEEDS ALLOWABLE LENGTH. 4.) STOVE OK FLEX AND VALVE OK. |