Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Denied
Inspection History: ELECTRIC - FINAL
Permit Number - T01EL02496
Inspection Description - ELECTRIC - FINAL
Inspection Status - Denied
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 02/22/2002 | ELECTRIC - FINAL | Denied | IVRS - Inspection 0245*1.) SEE NOTES BELOW CALL INSPECTOR MAC CAPISTRAN AT 791-5550 X 136 BETWEEN 7:30 & 8:00 AM TO RESOLVE PROBLEM. 1.) ITEMS OF NOTE 1 NEED TO BE CARRIED OUT 2.) THE PIPE NIPPLES BETWEEN SWITCHES AND GUTTER SHOULD HAVE SEALING LOCKNUTS TO KEEP WATER OUT 3.) UNABLE TO OPEN SWITCHES (DISCONNECT TO CHECK OUT INTERIOR WIRING & WORK. | |
| 02/08/2002 | ELECTRIC - FINAL | Not ready for Inspection | IVRS - Inspection 0000*LAST INSPECTION WAS FOR A CODE COMPLIANCE, REQUEST ALSO INCLUDED TO CALL BOB HALL AT 400-4689 TO MEET INSPECTOR HE IS ONE WITH PLANS. PERMANENTLY ADDRESS ALL MAIN DISCONNECTS TO THEIR USE, AND ALL SECONDARY DISCONNECT AT SERVICE AREA. | |
| 02/07/2002 | ELECTRIC - FINAL | Partial Approval | IVRS - Inspection 0000* | |
| 02/01/2002 | ELECTRIC - FINAL | Denied | IVRS - Inspection 0925*DENIED 2ND TIME NO PLANS AND NO EFFORT TO CORRECT PER LIST BELOW A REFEE WILL BE ASSESSED. | |
| 01/31/2002 | ELECTRIC - FINAL | Denied | IVRS - Inspection 0215*1.) NO PLANS OR PERMIT COPY ON SITE. PROBLEMS NOTED BELOW NOT CORRECTED. ARRANGE TO MEET WITH INSPECTOR ON SITE TO RESOLVE CHANGES NOTED ABOVE. | |
| 01/23/2002 | ELECTRIC - FINAL | Denied | IVRS - Inspection 0999*/ 1) CONDUCTORS IN CT CAN ARE 120/208 VOLT-SHOULD BE 480 VOLT COLORS SAME COLOR CODING IN 200 AMP SWITCHES INCORRECT. 2) INSTALL A NEW GROUNDING SYSTEM AS PER ENGINEERS DRAWING OLD GROUND FOR SERVICE INSUFFICIENT ONLY GOES TO WATER BOND 3) DRAWING CALLS FOR 10" X 10" GUTTER NOT 8" X 8" 4) NEUTRAL HAS TO BE RUN TO 200 AMP DISCONNECT FEEDING TRANSFORMER 5) GROUND LUG IN DISCONNECT FOR TRANSFORMER SET WRONG, SCRAPE SURFACE AND MOUNT ON FLAT SURFACE NOT MOUNTING HOLE. #4 ABOVE IS REFERENCED IN THE 99 NEC 250-24 5-B (TO BE RUN TO EACH SERVICE DISCONNECT AND BONDED TO EACH ENCLOSURE) 6) INSTALL FUSING AND PINS IN SERVICE DISCONNECTS 1-KTS-R 140A, 1-KTS R 200A |