Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Case Details

Status:

COMPLIAN

Type:

REFUSE
Address:

Entered Date:

05/05/2022

Applicant:

JUN DYNASTY CHINESE RESTAURANT

Description:

OVERFLOWING TRASH BIN IN THE BACK OF THE RESTURANT.

Completed Inspections

Case Status: COMPLIAN
Case Number: T22DV02792
Case Description: REFUSE
Total Completed Inspections - 2
End Date Description Inspector Results Comments
05/05/2022 INSP - INITIAL CODE ENFORCMENT SLAIWA Approved ON SITE, FOUND TRASH BIN OVER FILLED AND TRASH LEFT NEXT TO THE BIN, SMELL SO BAD ALSO GREASE CONTAINER NOT LOCKED, SENT 10 DAYS NOTICE OF VIOLATION.
06/06/2022 INSP - FOLLOW UP CODE ENFORCE SLAIWA Approved ON SITE, TRASH BIN IS CLOSED NO TRASH IS LOOSE OR DUMPED AROUND IT, IN COMPLIANCE AT THIS MOMENT, CLOSING CASE.

Outstanding Case Activity Conditions

Date Name Approved
05/10/2022 Sec. 15-10.1. Standards for storage and removal of solid waste. (A) Any person, business or other entity that generates refuse or recyclable materials must place the waste materials into the container(s) designated for the property where the waste is generated. Refuse must be removed from the property and transported to a permitted disposal facility frequently enough to maintain sanitary conditions. (B) Containers shall be rigid, durable, corrosion resistant, nonabsorbent, watertight, rodent-proof, easily cleanable, suitable for handling, and equipped with a tight fitting cover that prevents material from overflowing, spilling, or scattering onto surrounding premises. All containers and their enclosures shall be maintained in a sanitary and fire-preventive condition. (C) Each residential or commercial establishment that generates waste must have sufficient capacity in a sufficient number of containers to contain all waste with the lid closed. Except in the case of bulky material collection, storage of solid waste outside a container at the point of collection is prohibited. (D) Each residential or commercial establishment where the volume of solid waste generated cannot be conveniently contained in APC containers with capacity of three hundred (300) gallons or less shall obtain collection service in metal containers. (E) Each dwelling unit must have a minimum of forty-five (45) gallons of refuse container capacity available for use during the period between scheduled collection services. The director may waive capacity standards on a case-by-case basis. (F) Garbage must be placed in plastic bags that are tightly closed. (G) The director or designee may enter any property where waste is generated to inspect containers or stored solid waste for compliance with the requirements of this code. (Ord. No. 10539, § 4, 6-3-08, eff. 7-1-08; Ord. No. 10674, § 2, 6-2-09, eff. 7-1-09; Ord. No. 10986, § 1, 5-22-12, eff. 7-1-12) Not Approved

Completed Activity Special Conditions

Case Description - REFUSE
Case Number - T22DV02792
Case Status: COMPLIAN
Total Completed Case Activity Conditions: 4
Date Name
05/10/2022 CONTACTED IN PERSON
05/10/2022 CONTACTED BY MAILING
05/10/2022 NOTICE OF VIOLATION ISSUED
06/06/2022 VIOLATION CLOSED