Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Case: T10FR02693

Case Details

Status:

COMPLETE

Type:

INSPECTION
Address:

Entered Date:

12/21/2010

Applicant:

TESORO ENTERPRISES LLC

Description:

FULL INSPECTION

Completed Inspections

Case Status: COMPLETE
Case Number: T10FR02693
Case Description: INSPECTION
Total Completed Inspections - 1
End Date Description Inspector Results Comments
12/21/2010 INSP - FULL JDAVIS Approved 1. _____ 1008.1.8.3 Locks and latches. Locks and latches shall be permitted to prevent operation of doors where any of the following exits: " Places of detention or restraint. " In buildings in occupancy Group A having an occupant load of 300 or less, Groups B, F, M and S, and in churches, the main exterior door or doors are permitted to be equipped with key-operated locking devices from the egress side provided: 2.1. The locking device is readily distinguishable as locked, 2.2. A readily visible durable sign is posted on the egress side on or adjacent to the door stating: THIS DOOR TO REMAIN UNLOCKED WHEN BUILDING IS OCCUPIED. The sign shall be in letters 1 inch (25mm)high on a contrasting background, 2.3. The use of the key-operated locking device is revokable by the fire code official for due cause. -PLACE THE SIGN ON THE FRONT DOOR 2. _____ 1008.1.8.4 Bolt locks. Manually operated flush bolts or surface bolts are not permitted. - REMOVE THE SLIDE BOLTS ON THE REAR DOOR 3. _____ 605.5 Extension Cords. Extension cords and flexible cords shall not be a substitute for permanent wiring. Extension cords and flexible cords shall not be affixed to structures, extended through walls, ceilings or floors, or under doors or floor coverings, nor shall such cords be subject to environmental damage or physical impact. Extension cords shall be used only with portable appliances. - 2 EACH BEHIND THE MICROWAVE 4. _____ 605.6 Unapproved conditions. Open junction boxes and open-wiring splices shall be prohibited. Approved covers shall be provided for all switch and electrical outlet boxes. - BEHIND THE GRINDER - UNDER ELECTRICAL PANEL - PLACE BLANKS IN THE ELECTRICAL PANEL WHERE THE BREAKERS ARE MISSING