Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Search

Parcel Attributes

Parcel111071480
JurisdictionTucson, Pima County
City of Tucson ZoningR-2
Tucson WardWard 3
Tucson Registered NeighborhoodDoolen/Fruitvale
Major Street & Route

Arterial or Collector

Pima County Data Assessor, Recorder, Treasurer, ...
Parcel Map Map
Parcel Attributes Issue?

Annexations & Original City Zoning (OCZ)

Address: 3306 E GLENN ST
Date - 08/19/2026 6:14 a.m.
Total Number Of Annexations & Original City Zoning (1)
Plan Description Annexation Ordinance Effective Date OCZ Ordinance
C9-59-19 North To Roger Rd. And East To Kolb Rd. 1895 1957

Permits

Address: 3306 E GLENN ST
Date - 08/19/2026 6:14 a.m.
Total Number Of Permits - (5)
Permit Status Apply Date Expired Date Unit Type Description
TC-COM-1224-02325 Complete 12/10/2024 11/04/2025 Commercial Building Re permitting a multi meter pack that was installed in by another contractor in 2001 and partially approved for reconnect. original permit number T01EL01276
TC-RES-1024-06144 Void 10/22/2024 04/20/2025 Residential Building - One or Two Family VOID: OS – Wrong Permit Type. We were unable to process your request under a Residential Trade Permit. The scope of work and building type require that this request be submitted under a Commercial Trade Permit. This permit will be voided. inspection(s) in reference to original permit #T01EL01276(For electrical service relocation) to determine if new service is complete or needs corrections. If approvable will need clearance for cross over.
T01EL01276 EXPIRED 05/22/2001 12/23/2001 ELECT UPGRADE:ELECTRIC 60AMP TO 100AMP
T04EL00212 WITHDRWN 02/03/2004 N/A ELECT UPGRADE:ELECTRIC 60AMP 100AMP
T20RW03309 FINAL 06/10/2020 09/21/2020 ROW N.728359 - TRANSFER 1 MAIN CABLE, 1 AERIAL SERVICE DROP. EXCAVATE AND EXPOSE 1 CU YD OF BURIED FACILITIES, 200PR SPLICE, 25FT OFF BURIED CABLE. INSTALL 1 CABLE TAG, 1 CABLE GROUNDS, 1 POLE TAG. REMOVE AND INSTALL 1 DOWN GUY, ANCHOR, AND GUARD. PULL OLD POLE.